Flowmaster Ljuddämpare

Flowmaster´s ljuddämpare finns i en vid skala av utförande beroende på vad du vill ha ut av dom, klicka här för att gå direkt till Flowmaster hemsida!

Street Performance Mufflers

Flowmaster´s ljuddämpare ger klart mer effekt än original eller andra eftermarknadsprodukter.

• Vad som gör Flowmaster så unikt är kombinationen mer effekt och det unika avgasljudet. ”Flowmaster soundet” finns i flertalet ”toner” beroende på vilken serie av ljuddämpare man väljer.

Från det djupa agressiva ljudet i 40 serien till det tysta mjuka, men ändå rika Flowmasterljudet i 70 serien

50 Series Big Block – Three Chamber Mufflers

The 50 Series Big Block Muffler is our largest and quietest muffler made for tow vehicles, full-size trucks, large SUV’s and RV’s / Motorhomes. This muffler is made for more than just big cubic inch engine applications and has a very large Resonance Tuning Chamber to almost completely reduce interior resonance in large cab vehicles and enough case volume to handle engines under heavy loads. Significant improvements in mileage, torque, and horsepower are to be expected from this muffler, as well as decreased engine heat and wear. Available in 16-gauge aluminized steel and fully MIG-welded for maximum durability. 5 Thick x 12″ Wide x 22″ Long with inlet/outlet sizes of 3″ and 3.5″.

70 Series Big Block II – Three Chamber Mufflers

The 70 Series Big Block II Muffler uses a longer case for increased volume and added sound reduction that will still fit many applications that our wider 50 Series Big Block muffler won’t fit. It utilizes Flowmaster’s patented Delta Flow Technology for maximum efficiency and minimum interior resonance. The 70 Series mufflers are perfect for high performance street cars, most trucks, SUV’s, RVs and tow vehicles that require quiet operation with improved sound.

Constructed of 16-gauge aluminized steel and fully MIG-welded for maximum durability. 5″ Thick x 10″ Wide x 22″ Long with inlet/outlet sizes from 2.25″ up to 3″.

Super 50 (SUV) – Three Chamber Mufflers

The Flowmaster Super 50 Series (SUV) Muffler incorporates an increased case size with the technology from the 50 Series Delta Flow muffler. Made for all SUV’s and large displacement engine vehicles, the Super 50 Series larger case size allows for optimum exhaust flow, increased mileage, and reduced interior resonance. Also excellent for use on full-sized, high performance street cars looking to reduce interior resonance and tone levels for everyday driving. Constructed of 16-gauge aluminized steel and fully MIG-welded for maximum durability. 5″ Thick x 10″ Wide x 17″ Long with inlet/outlet sizes from 2.25″ up to 3″.

60 Series Delta Flow – Three Chamber Mufflers

All 60 Series Mufflers feature Delta Flow Technology to increase horsepower and torque in most four and six cylinder vehicles. The 60 Series mufflers have shown significant improvements in mileage, helping to save fuel on many commuter vehicles, the mellow tone making for a pleasant and quiet driving experience. Just by adding a larger diameter tailpipe and Flowmaster stainless tip you can create a deeper tone overall inside and out. Constructed of 16-gauge aluminized steel and fully MIG-welded for maximum durability. 5″ Thick x 10″ Wide x 13″ Long with inlet/outlet sizes of 2″ and 2.25″.

50 Series HD – Three Chamber Mufflers

The 50 Series Heavy Duty Muffler is appropriately named, a tough customer just like the trucks it was designed for. With 4.00” internal components and large case size, these mufflers help to significantly increase mileage, torque, and horsepower while greatly improving towing power and acceleration. The 50 Series Heavy Duty is great for all gas and diesel applications, and late-model trucks used in the most extreme working conditions. Constructed of 16-gauge aluminized steel and fully MIG-welded for maximum durability.5″ Thick x 10″ Wide x 18″ Long with inlet/outlet sizes from 3″ up to 4″.

HP-2 Series – Hushpower Mufflers

The Hushpower HP-2 Performance Muffler is a real hot rod muffler that delivers all the required benefits of a high performance street and race muffler, yet is small enough for street rod applications. Built from either 409S or 304S stainless steel, this smooth, stylish muffler can be polished or coated for a great looking finish. The HP-2 muffler is designed for use with street rods, customs, lowriders and sport trucks or industrial applications where heat control and space are an issue. The HP-2 mufflers feature an innovative “Cool Shell” casing, a key feature in contributing to the muffler’s sound and heat control design. Advanced “flow” technology produces broadband sound cancellation for a rich ‘50’s tone. The HP-2 mufflers use a 4.00” X 5.50” X 18.00 CASE and can be ordered with inlet/outlet diameters including 2.00”, 2.25” and 2.50”. (Shorty models with a 12″ long case are also available).

50 Series Delta Flow – Three Chamber Mufflers

Greatly reduced interior resonance, smaller case size, and moderate exterior tone are just some of the benefits to the 50 Series Delta Flow Mufflers. With a specially designed Resonance Tuning Chamber, the 50 Series Delta Flow gives all the performance, while reducing the tone inside and outside of your vehicle. Simply stated, it delivers the same great performance from Flowmaster, without the increased sound. Available in Aluminized Steel or 409S Stainless for harsh weather applications, and both are fully MIG-welded for maximum durability. 4″ Thick x 9.5″ Wide x 17″ Long with inlet/outlet sizes from 2″ up to 3″.

50 Series 4×8 – Three chamber Mufflers

This narrow version of our street three chamber design utilizes Flowmaster’s patented Delta Flow technology along with an internal tuning chamber to reduce sound inside the vehicle. Perfect for narrow frame vehicles like early Jeeps and german imports that are difficult to fit standard bodied mufflers. Available in 16-gauge aluminized steel and fully MIG-welded for maximum durability. 4″ Thick x 8″ Wide x 15″ Long with inlet/outlet sizes of 2″ and 2.25″.

40 Series Delta Flow – Two Chamber Mufflers

Designed to minimize interior resonance, the 40 Series Delta Flow Muffler offers an aggressive exterior tone. The 40 Series Delta Flow helps increase torque and horsepower on many late-model performance cars and trucks. Available in Aluminized and 409S Stainless for harsh weather applications, both are fully MIG-welded for maximum durability. 4″ Thick x 9.5″ Wide x 13″ Long with inlet/outlet sizes from 2″ up to 3″.

Super 40 – Two Chamber Mufflers

The Super 40 Muffler was developed from our Top Ten race muffler lineup for use on the street and strip. Utilizing Delta Flow Technology, this muffler gives the best performance to higher horsepower vehicles. The Super 40 features a black, oversize case, which keeps the resonance down while the deep outside tone says it’s a Flowmaster! Constructed of 16-gauge aluminized steel and fully MIG-welded for maximum durability. 5″ Thick x 10″ Wide x 13.5″ Long with inlet/outlet sizes from 2.25″ up to 3″.

50 Series 3×10 – Three Chamber Mufflers

This ultra thin version version of our three chamber design utilizes Flowmaster’s patented Delta Flow technology to help keep things quiet. Designed originally for the 70’s GM F-bodies, these mufflers are perfect for vehicles where ground clearance is a major concern. Available in 16-gauge aluminized steel and fully MIG-welded for maximum durability. 3″ Thick x 10″ Wide x 16″ Long with inlet/outlet size of 2.5″.

40 Series Classic – Two Chamber Mufflers

These are duplications Ray Fluggers original square ”Suitcase” mufflers that started it all. Built in a limited quantity of 1000 units, each is signed and numbered by Ray himself. Hand crafted and formed with the original tooling that was found in storage after 25 years. Unlike the originals however, these units are constructed with 409S stainless steel to last a lifetime. This is a special opportunity to own a piece of history. The square case with its wider profile produces an extra deep tone that many will recall as being ”Like the ones I had when I was a kid”

Original 40 Series – Two Chamber Mufflers

The muffler that started it all, the original 40 Series Muffler is an aggressive sounding street/strip muffler that delivers a powerful “Flowmaster Sound”. If you really want to hear your exhaust system – from both inside and outside of the vehicle, the 40 Series is for you. Available in either aluminized steel or 409S Stainless Steel and fully MIG welded for durability. 4″ Thick x 9.5″ Wide x 13″ Long with inlet/outlet sizes from 2.25″ up to 3″.

Super 44 – Two Chamber Mufflers

Flowmaster’s Super 44 Muffler uses the same Delta Flow Technology found in our larger Super 40 mufflers. The Super 44 delivers a powerful rich tone and is the most aggressive, deepest sounding, highest performing four-inch case street muffler we’ve eve built! Constructed from 16-guage aluminized or 409S Stainless Steel and fully MIG-welded for maximum durability. 4″ Thick x 9.5″ Wide x 13″ Long with inlet/outlet sizes from 2″ up to 3″.

80 Series – Cross Flow Mufflers

For True Dual exhaust performance where only a single exhaust system will fit such as is commonly found in classic Camaros and Firebirds, the 80 Series Cross-Flow Muffler fits transversely behind the rear axle and in front of the fuel tank, the OE placement. With single or dual inlets, the 80 Series gives excellent ground clearance, aggressive tone and dual outlets to fit muscle cars requiring this specialized fitment. Constructed of 16-gauge aluminized steel and fully MIG-welded for maximum durability.

Super 10 Series – One Chamber Mufflers

Because these mufflers are so aggressive, they are recommended only for off highway use and not for street driven vehicles

Single Chamber mufflers. Intended for customers who desire the loudest and most aggressive sound they can find. Because these mufflers are so aggressive, they are recommended only for off highway use and not for street driven vehicles. These mufflers utilize the same patented Delta Flow technology that is found in Flowmaster’s other Super series mufflers to deliver maximum performance. Constructed of 16-gauge 409S stainless steel and fully MIG-welded for maximum durability.